Poli Metil Metakrilat ile Karşılaştırıldığında Poliamid Rezinlerin Bazı Özellikleri Üzerine Termosiklasyonun Etkileri

Abuzar, M.A., Bellur ,S., Duong, N., Kim, B.B., Lu, P., Palfreyman, N., Surendran, D., Tran, V.T. (2010). Evaluating surface roughness of a polyamide denture base material in comparison with poly [methyl methacrylate]. J Oral Sci, 52, 577-581.

Ali, A.M.& Raghdaa, K.J. (2011). Evaluation and comparison of the effect of repeated microwave irradiations on some mechanical and physical properties of heat cure acrylic resin and valplast [nylon] denture base materials. J Bagh College Dent, 23: 6-10.

Anusavıce, K.J. (2003). Philips’ Science of Dental Materials, 11th Ed., Elsevier Science Ltd., St. Louis. Ch: 4. ,337-42.

Branting, C., Sund, M.L., Linder, L.E. (1998). The influence of Streptococcus mutans on adhesion of Candida albicans to acrylic surfaces in vitro. Arch Oral Biol., 34: 347-353.

Bulad, K., Taylor, R.L., Verran, J., Mc Cord, J.F. (2004). Colonization and penetration of denture soft lining materials by Candida albicans. Dent Mater, 20: 167-75.

Freitas Fernandes, F.S., Pereira-Cenci, T., Da Silva, W.J., Filho, A.P., Straioto, F.G., Del Bel Cury, A.A. (2011). Efficacy of denture cleansers on Candida spp. biofilm formed on polyamide and polymethyl methacrylate resins. J Prosthet Dent, 105: 51-8.

Gale, M.S., Darvell, B.W. (1999). Thermal cycling procedures for laboratory testing of dental restorations. J Dent, 27: 89-99.

Goiato MC, Panzarini SR, Tomiko C, Luvizuto ER. (2008). Temporary Flexible Immediately Removable Partial Denture: A Case Report. Dent Today, 27: 114-6.

Goiato, M.C., Dos Santos, D.M., Haddad, M.F., Pesqueira, A.A. (2010). Effect of accelerated aging on the microhardness and color stability of flexible resins for dentures. Braz Oral Res, 24: 114-119.

Hahnel, S., Henrich, A., Rosentritt, M., Handel, G., Burgers, R. (2010). Influence of artificial aging on surface properties and Streptococcus mutans adhesion to dental composite materials. J Mater Sci Mater Med, 21: 823-833.

Hahnel, S., Rosentritt, M., Handel, G., Bürgers, R. (2009). In vitro evaluation of artificial ageing on surface properties and early Candida albicans adhesion to prosthetic resins. J Mater Sci Mater Med, 20: 249-55.

Hargreaves, A.S.(1971). Nylon as a denture-base material. Dent Pract Dent Rec, 22: 122-128.

Hayakawa, I., Keh, E.S., Morizawa, M., Muraoka, G., Hirano, S. (2003). A new polyisoprene-based light-curing denture soft lining material. J Dent, 31: 269-74.

ISO 1567, (1999). International Organization for Standardization. Dentistry - denture base polymers. www.iso.ch/iso/en/prods-services/ISOstore/store.html.

Jin, N.Y., Lee, H.R., Lee, H., Pae, A. (2009).Wettability of denture relining materials under water storage over time. J Adv Prosthodont. ,1: 1-5.

Kasuga,Y., Akiba, N., Minakuchi, S., Uchida, T., Matsushita, N., Hishimoto, M., Hayakawa, I. (2008). Development of soft denture lining materials containing fluorinated monomers. Nihon Hotetsu Shika Gakkai Zasshi, 52: 183-188.

Keyf , F.A., Keyf, I.A. (1998). Harmful effects of methylmethacrylate and formaldehyde from acrylic resin denture base materials. SADJ. , 10: 23-28.

Khindria, S.K., Mittal S, Sukhija, U. (2009). Evolution of denture base material. J Indian Prost Soc, 9: 64-9.

Kurtulmus, H., Kumbuloglu, O., Aktas, R.T., Kurtulmus, A., Boyacioglu, H., Oral, O. (2010). User A. Effects of saliva and nasal secretion on some physical properties of four different resin materials. Med Oral Patol Oral Cir Buccal, 1: 969-975.

Kwok, D.Y., Leung, A., Lam, C.N.C., Li, A., Wu, R., Neumann, A.W. (1998). Low-rate dynamic contact angles on poly[methyl methacrylate] and the determination of solid surface tensions. J Colloids and Interface Sci, 206: 44-51.

Lai, Y..L, Lui ,H.F., Lee, S.Y. (2003). In vitro color stability, stain resistance, and water sorption of four removable gingival flange materials. J Prosthet Dent, 90: 293-300.

Lampin, M., Warocquier-Clérout, R., Legris, C., Degrange, M., Sigot-Luizard, M.F. (1997). Correlation between substratum roughness and wettability, cell adhesion, and cell migration. J Biomed Mater Res, 36: 99-108.

MacGregor AR, Graham J, Stafford GD, Huggett R.(1984). Recent experiences with denture polymers. J Dent, 12: 146–57.

Mandras, R.S., Retief, D.H., Russell, C.M. (1991).The effects of thermal and occlusal stresses on the microleakage of the Scotchbond 2 dentinal bonding system. Dent Mater, 7: 63-67.

Miettinen, V.M., Narva, K.K., Vallittu, P.K. (1999). Water sorption, solubility and effect of post-curing of glass fibre reinforced polymers. Biomaterials, 20: 1187-1194.

Monsénégo, P., Baszkin, A., Costa, M.L., Lejoyeux , J. (1989).Complete denture retention. Part II: Wettability studies on various acrylic resin denture base materials. J Prosthet Dent, 62: 308-12.

Morley, F.& Stockwell, P.B. (1977). A simple thermal cycling device for testing dental materials. J Dent, 5: 39-41.

Munss, D. (1962). Nylon as a denture base material. Dent Pract Dent Rec, 13: 142-146.

Nishioka, M., Yamabe, Y., Hisatsune, K., Fujii, H. (2006). Influence of polishing of denture base resin and metal surfaces on wettability with water and saliva. Dent Mater J; 25: 161-165.

O’Brien W.J. (2002). Dental Materials and Their Selection. 3rd Ed., Chicago, USA, Quintessence Publishing Co. Inc, 2002, Ch: 6.

Peterson, E.A., Phillips, R.W., Swartz, M.L. (1966). A comparison of the physical properties of four restorative resins. J Am Dent Assoc, 73: 1324-1336.

Parr, G.R. & Rueggeberg, F.A. (2002). In vitro hardness, water sorption, and resin solubility of laboratory-processed and autopolymerized long term resilient denture liners over one year of water storage. J Prosthet Dent, 88: 139-44.

Phoenix, R.D., Mansueto, M.A., Ackerman, N.A., Jones, R.E. (2004). Evaluation of mechanical and thermal properties of commonly used denture base resins. J Prosthodont, 13: 17-27.

Quirynen, M. (1994). The clinical meaning of the surface roughness and the surface free energy of intra-oral hard substrata on the microbiology of the supra- and subgingival plaque: results of in vitro and in vivo experiments. J Dent ; 22 Suppl 1:S13-6.

Rossomando, K.J.&Wendt, S.L. Jr. (1995). Thermocycling and dwell times in microleakage evaluation for bonded restorations. Dent Mater, 11: 47-51.

Singh, J.P., Dhiman, R.K., Bedi, R., Girish, S.H. (2011). Flexible denture base material: A viable alternative to conventional acrylic denture base material. Contemp Clin Dent, 2: 313-317.

Statford, G.D., Handley, R.W. (1975). Transverse bend testing of denture base polymers. J Dent, 3: 251–5.

Taira, M., Nakao, H., Matsumoto, T., Takahashi, J. (2000).Cytotoxic effect of methyl methacrylate on 4 cultured fibroblast. Int J Prosthodont., 13: 311-5.

Takabayashi, Y. (2010). Characteristics of denture thermoplastic resins for non-metal clasp dentures. Dent Mater J , 29: 353-61.

Taylor R, Maryan C, Verran J. (1998). Retention of oral microorganisms on cobalt chromium alloy and dental acrylic resin with different surface finishes. J Prosthet Dent., 80: 592-7.

Taylor, R.L., Verran, J., Lees, G.C., Ward, A.J. (1998). The influence of substratum topography on bacterial adhesion to polymethyl methacrylate. J Mater Sci Mater Med. , 9: 17-22.

Thakral, G.K., Aeran, H., Yadav, B., Thakral, R. (2012). Flexible partial dentures - A hope for the challenged mouth. People’s J Sci Res, 5: 55-59.

Tuna, S.H., Keyf, F., Gumus, H.O., Uzun, C. (2008). The evaluation of water sorption/solubility on various acrylic resins. Eur J Dent, 2: 191-7

Ucar, Y., Akova, T., Aysan, I. (2012). Mechanical properties of polyamide versus different PMMA denture base materials. J Prosthodont, 21: 173-176.

Uzun, I.H., Tatar, A., Hacimuftuoglu, A., Saruhan, F., Bayindir, F. (2013). In vitro evaluation of long-term cytotoxic response of injection-molded polyamide and polymethyle metacrylate denture base materials on primary fibroblast cell culture. Acta Odontol Scand, 71: 1267-72.

Waltimo, T., Vallittu, P., Haapasalo, M. (2001). Adherence of Candida species to newly polymerized and water-stored denture base polymers. Int J Prosthodont, 14: 457-60.

Watt, D. (1955). Clinical assessment of nylon as a partial denture base material. Br Dent J, 98: 238-44.

Wenzel, R. (1936). Resistance of solid surfaces to wetting by water. Ind Eng Chem; 28: 988-994.

Wu, J.C., Latta, G.H., Wicks, R.A., Swords, R.L., Scarbecz, M. (2003). In vitro deformation of acetyl resin and metal alloy removable partial denture direct retainers. J Prosthet Dent, 90: 586-590.

Yavuz T, Aykent F. (2012).Temporary flexible removable partial denture: a clinical report. Clin Dent Res, 36: 41-44.

Yunus, N., Rashid, A.A., Azmi, L.L, Abu-Hassan, M.I. (2005). Some flexural properties of a nylon denture base polymer. J Oral Rehabil, 32: 65-71.

Zissis, A., Yannikakis, S., Jagger ,R.G., Waters, M.G. (2001). Wettability of denture materials. Quintessence Int , 32: 457-62.